Appliance Error Code Guide Codes, causes & fix order

Independent · Manufacturer documents · Check order first

Your appliance is showing a code. Here is what it means, and what to check first.

Samsung 4E, LG OE, Bosch E15, Whirlpool F21 — every guide gives the short answer in three lines, the meaning of the code, a check order you can follow at home, the part each check points to, and when it is cheaper to stop and call someone.

40 code and fault guides 9 brands covered 5 machine types 0 invented prices

Find your machine

Five machines, five different ways to fail

A washer reports a fill or drain timeout, a dryer reports a heater or airflow fault, a refrigerator names the circuit that stopped, a dishwasher numbers its functions, an air conditioner names the sensor it cannot read. Start from the machine, then the code.

Latest guides

New this week

Each guide is built the same way: short answer, meaning, check order, the part it points to, then the decision about money.

Samsung9 min read

Samsung Dishwasher Error Codes

Samsung dishwasher codes explained: 4C water supply, 5C drain, LC leakage, HC and HE heater faults, and the 1E filter code, with the checks before a service call.

Read the guide →
LG8 min read

LG Dishwasher Error Codes

LG dishwasher codes: IE water inlet, OE outlet, AE or E1 leak, HE heater, tE sensor and bE oversudsing, with the filter and drain checks that clear most of them.

Read the guide →
Samsung8 min read

Samsung Air Conditioner Error Codes

Samsung air conditioner error codes: room and pipe sensor faults, fan faults, drain and float errors, and the C1 blink codes, with what to reset and what to report.

Read the guide →
LG8 min read

LG Air Conditioner Error Codes

LG air conditioner codes by group: CH01 to CH48 sensors, CH21 to CH29 compressor, CH04 drainage, CH05 communication, CH10 and CH67 fans.

Read the guide →
Hisense9 min read

Hisense Refrigerator Error Codes

Hisense fridge codes differ by platform: F1 to F5 sensor and defrost faults on export models, E and F codes on multi-door models, plus dr and OF.

Read the guide →
Defy8 min read

Defy Washing Machine Error Codes

Defy top loader codes depend on the model: E1 to E6 on the DTL160 family, a different set on the DTL153 and DTL200. Find the model number first.

Read the guide →
Electrolux9 min read

Electrolux Washing Machine Error Codes

Electrolux and AEG washer codes grouped by system: E10 fill, E20 drain, E30 sensor, E40 door, E50 motor, E60 heating, EF0 leaks and EH0 power.

Read the guide →
Bosch9 min read

Bosch Washing Machine Error Codes

Bosch washer codes: E16 door, E17 water supply, E18 drain, E19 and E20 heating, E21 motor, E23 AquaStop, plus the F-code equivalents.

Read the guide →

Start here

Three things to do before you touch the machine

They cost nothing, they rule out most false alarms, and they decide whether the next step is a ten-minute job or a service call.

Write down the code and the model

The code is what the board noticed. The full model code on the rating plate is what identifies the parts inside. A guide without the model is a guess, and a parts counter without it is a lottery.

Pull the plug, then do the free checks

Filters, hoses, taps, lint paths, door latches, a machine that is not level. Most codes that owners search for are caused by one of these six things, and none of them needs a part.

Decide before you order

If the part costs more than a third of the machine's remaining life is worth, the honest answer may be replace. The cost formula explains how to judge that without invented prices.

How these guides are written

This site is independent editorial work. Every guide is built from the manufacturer's own service and support documentation, the fault logic those documents describe, and the parts trade that supplies the replacements — not from another listicle, and not from a press release.

We do not sell appliances, parts or labour, and we do not publish repair prices: they move with country, brand, stock and labour rate, so a number here would be wrong somewhere. What we give instead is what the job involves and what moves the bill, so a quote you receive can be read line by line.